Special Instructions; Safety Instructions In Transportation, Storage And Installation - Famsun MY265 Operation Manual

1.4 Special instructions

(1)The said equipment operators refer to all personnel who should participate in operation,
inspection and maintenance etc.
(2)The equipment operator must possess satisfactory understanding of the Operation
manual.
(3)The owner has the duty and obligation to educate all operation personnel with the
safety instructions of the Operation Manual for the equipment.
(4) While obeying all the safety instructions herewith, the users must comply with all other
safety regulations and stipulations to prevent accidents.
(5) All related employees should receive safety training. The enterprise management of
user should be in charge of the training and observe the national, local and company's
other safety regulations.
(6)All the responsibilities for any accidents or damages to the equipment shall not be
borne by manufacturer and commission agent if the equipment is not operated according
to the Operation manual.
(7) Please install, use and operate the equipment correctly. Whoever taking off guard or
signs to destroy its function should be responsible for the safety consequences.
(8)In normal production, high pressure exists in the extrusion barrels and thus the
installation of the extrusion barrels must meet all the requirements to firmly connect the
barrels in theoretical way and practical application. However, accident such as "ejection"
out of the extrusion barrels or discharge device during production may occur due to
improper installation and screw fatigue. Therefore, no one is allowed to stand by the
extrusion barrels when extruder is in running.
(9)Any changes to the equipment shall not affect the functions and safety performances of
the equipment.
(10) Be sure to run the extruder under strict obeying all regulations for prevention of
accidents.
(11) If any accidents occur due to failure in obeying the stipulations of the
Operation Manual and the control system for FAMSUN equipment is not used as per
the conditions mentioned above, FAMSUN will deny any responsibility. If FAMSUN is
required to take such responsibility, we will reserve the right to investigate and affix the
liability of the party who is accountable.

1.5 Safety instructions in transportation, storage and installation

(1) The equipment must be placed and handled by professionals.
(2)Please use designated tools (steel cable, crane, hoist etc.) to lift the equipment
according to designated sequence and method.
(3) Authorized staff only for lift operation.
(4) In order to prevent serious injury accidents, no one is allowed to present under the
7