Daily Inspection And Periodical Inspection; List Of Daily Inspection Items - Famsun MY265 Operation Manual

6.2 Daily inspection and periodical inspection

During daily and periodical inspection, stop the machine immediately and take
proper steps in case of any abnormality in machine operation. Resume the
operation after confirming that the machine is recovered to normal conditions.

6.2.1 List of daily inspection items

No. Position
1 Steam
2 Machine
3 Bearing
Motor
4
Motor
5 Gear motor
Temperature
6
sensor
No.
1
2
3
4
5
Table 6-1 List of daily inspection items
Inspected items
Check on steam pressure if higher
than 0.6MPa before pressure
reducing valve
Check on steam pressure is
about 0.4MPa after pressure
reducing valve
Check for liquid leakage
Check the trap valve for normal
working condition
Check for any abnormal noise
Check for temperature rise below
45℃
Check for temperature rise below
45℃
Check the amount of lubricant and
for any abnormal noise
Electric current
Check for any abnormality
Table 6-2 Check list of rated power and current of motor
Rated power (KW)
3
7.5
11
30
400
Cycle
Everyday
Everyday
Everyday
Everyday
Everyday
Everyday
Everyday
Everyday
Everyday
Everyday
Rated current (A)
6.73
11.7
22.5
57.6
780
68
Method Solution
Adjust steam
Inspection supply
pressure
Adjust the
Inspection pressure
reducing valve
Exhaust steam
Inspection
and repair
Exhaust steam
Inspection
and clean
Listening Checking
Thermometer Checking
Thermometer Checking
Observation Checking
Ammeter Cleaning
Inspection Replacing
Remarks