General Safety Instructions; Safety Instructions For Transportation, Storage, And Installation - Famsun TCXT Series Operation Manual

Spouting permanent magnet
Table of Contents

Advertisement

1.3 General safety instructions

¥
1
¦
T he said equipment operators herein refer to all workers who participate in operation,
inspection, repair, and maintenance etc.
2
T he equipment operator must possess satisfactory understanding of the Operation
¥
¦
Manual.
3
A s to the following safety instructions, it's the responsibility and obligation of the
¥
¦
enduser owner to inform all the operation team members of the contents in this
Operation Manual.
¥
4
¦
While following all the safety instructions herewith, the users must comply with all other
safety regulations and stipulations to prevent accidents.
5
A ll related employees shall receive safety education. The enterprise management
¥
¦
should be in charge of the training and observe the national, local, and the other
internal safety regulations of the enterprise.
6
T he equipment supplier and representatives will not take any liability for the damage
¥
¦
caused by the enduser due to failure to comply with the operation regulations.
¥
7
¦
P lease install, operate the equipment in a correct way. Whoever taking off the safety
devices or destrying their fuctions shall take the responsibility of the consequencies.
¥
8
¦
Any modifications to the equipment may not alter the functions and safety
performances of the equipment.
9
O peration of the magnet shall comply with all the regualtions to prevent accidents.
¥
¦
1 0
F AMSUN Co., Ltd will decline any responsibility for the accident or equipment
¥
¦
damage caused by fail to comply with the regulations of the Manual and by lack of
above-mentioned conditions for control system. If FAMSUN is requested to take the
responsibility, we will reserve the right to investigate and affix the responsibility to the
party who is liable.

1.4 Safety instructions for transportation, storage, and installation

1
T he equipment must be placed and handled by professionals.
¥
¦
2
U se designated tools (steel cable, crane, hoist etc.) to lift the equipment according to
¥
¦
the specified sequence and method.
3
A uthorized staff only for entering the site to perform lifting operation.
¥
¦
¥
4
¦
I n order to prevent serious injury accidents, no one is allowed to present under the
equipment being lifted.
¥
5
¦
T he capacity of hoisting tools should be greater than the total weight of the equipment.
6
F or temporary storage of the equipment, place the equipment level and indoors. Keep
¥
¦
the room clean and temperature normal.
7
F or transportation, it is not allowed to damage the equipment by packing. Report to the
¥
¦
1-2

Advertisement

Table of Contents
loading

Table of Contents