Mira Activate Series Installation And User Manual page 26

4
Twist the shroud and fix using the locking screw.
Important! Flush the pipework before fitting the hose and handset.
5
Fit all the components onto the slide bar and position the slide bar assembly against
bathroom wall in desired position and mark the fixing holes for both brackets.
Carefully remove the slide bar assembly and tighten the screw on the back of the
slide bar support to secure in position. DO NOT tighten slide bar clamping screw
more than 1/2 turn.
Slide Bar
Slide Bar
Support
Clamping
Screws
26