Mira Activate Series Installation And User Manual page 23

3
Position the slide bar assembly against
the wall and move the top bracket to
desired height and click in place.
Top Wall
Fixing Bracket
5
Position the slide bar assembly against
the bathroom wall and secure using the
supplied fixing screws.
Ensure that the shrouds are facing the
correct direction.
Clip the top and bottom shrouds to both
the fixing brackets.
Caution: Use flat head screwdriver
to unclip the shrouds from the
brackets when required.
Slide the ceiling plate up to the ceiling
to cover the entry hole.
Wall Bracket
Top Cover
Slot
4
Mark the fixing holes for both brackets.
Remove the slide bar assembly and
drill into the marked holes to suit the
wall fixings.
Insert the wall plugs.
"Click"
6
Use the supplied elbow to connect to
the digital mixing valve.
Flexible
7
Loosen the screw and remove the lid
from digital mixing valve.
Fixed
Elbow
23