Table of Contents
Advertisement
1.6
ELECTRIC INSTALLATION SCHEME
LEGEND
1
Main switch (prearranged by the customer)
When carrying out the electric connections, please take into
consideration all warnings and indications provided so far
in this manual. Furthermore, in order to avoid dangerous
overheating, unwind completely the feeding cable.
a) Connect the cable (A - pict 2) directly to the socket
(1 - pict 2).
1.7
WATER MAINS INSTALLATION SCHEME
THE INSTALLATION OF THE WATER SOFTENER IS RECOMMENDED IN ORDER FOR THE MACHINE
TO LAST LONGER.
Install the water softener according to the instructions and regulations provided by its manufacturer.
The water softener needs to be placed in an easily accessible place in order to allow the performance
of the regeneration when due and generally close to the water siphon.
If the water softener is not used, it is recommended to apply a filter on the water inlet pipe, in order to
prevent impurities from damaging the motor pump or the machine.
6
LSI 005 -UK- REV. 04
3
1
2
3
1
The equipment is supplied without water in the
boiler so as to prevent the boiler from being
3
badly damaged, should the equipment be
exposed to temperatures lower than 0°.
Carry out connections according to picture 3 and
take into account what follows:
•
hoses must not be kicked, squashed nor
twisted;
•
fasten firmly, but without exerting too much
2
pressure, the threaded ring units of the hose
connectors (3 - pict 3).
INSTRUCTIONS MANUAL FOR THE INSTALLER
A
1
LEGEND
Water tap (prearranged by the customer)
Water softener (optional)
Flexible pipes resisting high pressure
(provided with the machine)
2
Advertisement
Table of Contents
