Table of Contents
Advertisement
WARNING!
This equipment is to be used only for the purpose it was intended for. Any other use is therefore
to be considered as improper and irrational. The manufacturer is not liable for any damage caused
by improper, wrongful or unreasonable use.
1.4
WARNING FOR THE INSTALLER
Read carefully the instructions and warnings included in this manual and in the manual "USE AND
MAINTENANCE" since they provide important indications concerning the installation of the equipment.
Make sure that the customer has prearranged the system following the instructions of the "Manual for Use
and Maintenance" enclosed with the machine. Moreover, verify the solidity of the bearing surface where
the machine will be placed.
Check that the power absorption of the electric system made by the customer corresponds to the maximum
value stated on the machine plate.
The electric safety of this appliance will be fully achieved only after its proper connection to ground carried
out according to the regulations in force.
The equipment must be supplied exclusively with cold drinkable water.
The maximum mains pressure (static pressure) must be 0,6 Mpa.
The machine should not be enclosed.
The machine needs to be installed so that the disconnection plug from the electric main source remains accessible.
If in doubt, regarding the above mentioned important requirements, (with reference to the system arranged
by the customer) please consult qualified staff.
The appliance is not supposed to operate in the external environment, that is to say directly subject to
atmospherics.
The machine has to be installed so that the upper grid for cups placement is at a height superior to 1,5
mt from the floor.
WARNING!
Installation must be carried out according to the regulations in force and to the manufacturer's instructions.
An improper or wrong installation may cause damage to animals, people or things.
The manufacturer is not liable for damage caused by a wrong installation.
1.5
INSTALLATION
After having unpacked the machine please check its integrity, in
case of doubt do not use it and consult the manufacturer.
Packaging materials must be removed in order to prevent
children from being hurt.
Place the machine on a stable bearing surface, by lifting it
from its base.
Before connecting the plug into the socket of the electric
system, please check that the data on the plate correspond
to the ones of the installation place.
LEGEND
1
Power feeding cable
2
Main switch (prearranged by the user)
3
Water tap (prearranged by the user)
4
Flexible pipes at high pressure
INSTRUCTIONS MANUAL FOR THE INSTALLER
2
4
1
3
LSI 005 -UK- REV. 04
1
5
Advertisement
Table of Contents
