Table of Contents
Advertisement
4
N. B.
All appliances are equipped to operate with an additional module. To enable this function, proceed
as follows:
•
Disconnect the appliance from the electric mains
•
Move the selector on the control unit box to the ON position
•
Reconnect the appliance to the electric mains.
This additional module serves to set the time for the appliance to switch on and off for each day of the
week.
Plug the appliance into electric mains; even if with the appliance on standby, the clock module (TIMER)
will be powered and the display will show the logo «La Spaziale» for 3 seconds, followed by the software
version and then the current time and date.
If the timer is set, alternatively to the date, it is possible to see the time that the appliance will next switch
on if it is switched off ( ON 14:30 ), or the time that the appliance will next switch off if it is on ( OFF 21:30 ).
N. B.
This only happens if the operations will occur before midnight of the current day.
If the timer is not set, the message "TIMER OFF" will be shown under the time visualization.
4.1
PROGRAMMING
When the
is pressed and held down for 3 seconds from the main screen, the display will read:
OK
Using the
To set one of the three possible choices, stop at the required screen and press the
CLOCK / TIMER MODULE (Optional)
buttons, it is possible to select the other possible settings, which are:
INSTRUCTIONS MANUAL FOR THE INSTALLER
14 : 20
27-10-06
Select
Timer
Select
Language
Select
Clock
button.
OK
LSI 005 -UK- REV. 04
13
Advertisement
Table of Contents
