9. Technical data of the UNGUATOR® Q
Electrical requirement
Total power consumption
Power consumption (mixing motor)
Power consumption (lifting motor)
Operating mode continuous operation S1
Safety class I
Type of protection
Speed controller
Timer
UNGUATOR® Jar sizes
Weight
Dimensions (L x W x H in mm)
Quality assurance
9.1 Quality and material
Manufacturing facilities for the UNGUATOR® line of products is certified according to DIN
EN ISO 9001:2008. Regular quality control, ensures both outstanding and sustainable
quality of the UNGUATOR® Mixing Technology.
•
The UNGUATOR® Aplicators, Couplings and Jars, are made out of Polypropylen (PP)
and the regular UNGUATOR® Varionozzles of Polyethylen (PE).
•
The UNGUATOR® SMB is made out of Polyoximethylen.
•
The UNGUATOR® Disp. MB is made out of Polyamid.
•
The shaft of the UNGUATOR® MB is made of NIRO-Stainless steel (quality standard:
1.4301) and hardened titanium-nitride (golden color). The utilized material and
pigments are physiologically classified as safe.
10. References
The advantages of the UNGUATOR® Mixing Technology and -System compared to
conventional manufacturing methods with mortar and pestle are frequently mentioned
Tab. 10: Technical data of the UNGUATOR® Q
no restrictions
300 W
250 W
50 W
Continuous operation S1
I
IP 20
in 10 stages electronically controlled
Program control or in stages
15 ml - 500 ml
13,6 kg (30.0lbs)
320 x 220 x 600
CE, TÜV-GS
38