Table of Contents
Advertisement
6.3 The mixing process with the UNGUATOR® Q
The UNGUATOR® Q is the result of continuous improvements of the UNGUATOR®
Technology.
The integrated programmable software that automates the UNGUATOR® Q Mixing System
completely turns the device into a universal machine for the production of formulations!
The UNGUATOR® Q works with two quiet, high duty, permanent motors and is an
intelligent ointment mixing machine for formulation from 15-500ml. You can work in the
ranges of 0 to 2400 rpm and produce homogeneous formulations. It is also possible to set
intervals and the device gives you the opportunity to interrupt the formula manufacturing
in a controlled manner.
After selecting a program and the size of the UNGUATOR® Jar a microprocessor controls
the mixing parameters for a consistent and reproducible product quality.
After the completion of each preparation, the UNGUATOR® Q automatically assigns an
identification number. It is used for simple documentation and the accurate reproduction
of the mixing process and will appear on the display after the mixing process.
6.4 Formulation programs
6.4.1 Quick-ID-Start
In the program "Quick ID-Start" you can quickly enter a defined or previously created
mixing program using a certain identification (ID) code. The program automatically
transforms any mixing program to different jar sizes without recalculating them. This
"scaling" process is based on the original ID code in combination with the current jar size.
For this purpose enter a previously defined identification code, e.g. a pre-created or
documented formulation.
Pic. 25: Program "Quick-ID-Start"
18
Advertisement
Table of Contents
