Unguator® Applicators; Unguator® Spindle - Gako UNGUATOR Q Operatng Instructons And Producton Recomendatons

5.2.4 UNGUATOR® Applicators
The UNGUATOR® Applicators reduce the dispensed quantity of low-viscosity formula-
tions and are particularly helpful in cases where the ointment must
be applied precisely.
UNGUATOR® Applicator short
The UNGUATOR® Applicator short with a diameter of 1mm is
obligatory for nose and ear ointments. The UNGUATOR® Applicator
short comes with a cap to close the applicator
UNGUATOR® Applicator long
Pic. 20: Applicator long
5.2.5 UNGUATOR® Spindle
The UNGUATOR® Spindle serves as a dispensing system for UNGUATOR® jar sizes 300 ml
or 500 ml UNGUATOR® Jars that come with UNGUATOR® Spindles. The spindle has to
be removed by rotating it clockwise prior the mixing process. The bottom can be slid
up and down when the UNGUATOR® Spindle is screwed slightly (1/2 to max. 1 turn)
counterclockwise without perforating the movable bottom (a slight resistance can be felt
before the bottom is perforated).
Air can be decreased by placing the UNGUATOR® Jar onto the table and using both hands
pushing the jar against the table.
Before giving the UNGUATOR® Jar to the customer, the UNGUATOR® Spindle must be
screwed in the UNGUATOR® Jar counter clockwise from the bottom till it locks into place.
The UNGUATOR® Spindle must be turned clockwise to extract the ointment. To remove
The UNGUATOR® Applicator long with a diameter of 2 mm allows
formulations to be introduced into large orifices of the body or
probes. Moreover, the UNGUATOR® Applicator long also comes
inside each UNGUATOR® 200 ml Jar to help pushing up the bottom
of this jar size in full. The UNGUATOR® Applicator long is generally
available both with and without cap.
Pic. 19: Applicator short
14