Step 4 – Summary
Click Step 4 - Summary. Check parameter settings. Return to individual steps if further
changes are necessary.
The Quick Start is now complete. Put Resource Block into Automatic Mode, see Changing
block modes (Page 71).
7.1.1.5
Changing block modes
Note
Resource Block overrides Level Transducer Block. Changing Resource Block mode will also
change Level Transducer Block mode.
To change any block mode follow the same procedure as for changing Resource Block
mode.
LR560 (FOUNDATION FIELDBUS)
Operating Instructions, 06/2018, A5E34648692-AE
Operating
7.1 Remote operation
71