SunSetter EasyShade Replacement page 6

Adjusting Existing Up and Down Positions for a Motorized EasyShade
Follow these instructions if you wish to change your current Up or Down position limits. To
change an existing position limit, the Motorized EasyShade must be able to reach the existing
position and stop at that position on its own.
NOTE: Do Not exceed the 84" DOWN Limit as this will cause the screen to roll up backwards
in the housing.
my
my
APPENDIX A
To Change the DOWN Limit:
Move the EasyShade to its current DOWN limit position and let it stop. Press the
(UP) and (DOWN)
release. Adjust to a new DOWN limit position. Press the (MY)
EasyShade jogs, then release. Check the new DOWN limit.
To Change the UP Limit:
Move the EasyShade to its current UP limit position and let it stop. Press the
(UP) and (DOWN)
release. Adjust to a new UP limit position. Press the (MY)
EasyShade jogs, then release. Check the new UP limit.
buttons simultaneously until the EasyShade jogs, then
buttons simultaneously until the EasyShade jogs, then
6
button until the
my
button until the
my