Table 4-3 Parts List For Ups Monitoring; Figure 4-25 Psau-60 Pcb (Ps1); Figure 4-26 Dpau-81 (Sw1); Figure 4-27 3Bba0083P001 (Cable1) - Toshiba G9000 Series Installation And Operation Manual

The parts (included RemotEye 4) for UPS monitoring are listed below.
Parts No.
1 Power supply PCB (PS1): PSAU-60*
2 Cable1: 3BBA0083P001
3 RemotEye 4 module
4 Cable2: D-sub 9-pin to RJ45 Cable
5 Cable3: 12V Power Cable
Connector CN44
to be connected with
CN27 of DPAU-81(SW1).
Connected with
3BBA0083P001(Cable1)
Shown in FIGURE 2.17.
Connector CN27
to be connected with
CN44 of PSAU-60(PS1).
D3200 5pin
(housing)
40
Table 4–3 Parts List for UPS Monitoring
Part name
* – PCB revision suffix may be applied.

Figure 4-25 PSAU-60 PCB (PS1)

Figure 4-26 DPAU-81 (SW1)

Figure 4-27 3BBA0083P001 (Cable1)

Figure 4-24 PSAU-60 PCB (PS1)
Figure 4-25 DPAU-81 (SW1)
Figure 4-26 3BBA0083P001 (Cable1)
G9000 Series UPS 300-750kVA Installation and Operation Manual – 61480-017
Qt'y
1
1
1
1
1
D-sub connector CN1
to be connected with
RemotEyeII.
Terminal block TN
to feed 12VDC power
to RemotEyeII.
(12V across P to N)
Optional interface CN2
to give 12VDC power
(12V Pin#1 to #2)
(Note 12VDC exposed)