Onvif; Video Management Systems - visual engineering MFR User Manual

MFR

ONVIF

Video Management Systems

The MFR Camera with an IP encoder fitted supports the ONVIF protocol such that it can be
controlled and viewed on ONVIF compliant VMS platforms such as ONVIF Device Manager,
Milestone and Airship.
ONVIF Device Manager is available as a free download available here:
https://sourceforge.net/projects/onvifdm/
The software will locate IP encoders on the network. Click the Network settings tab to display the
port that the encoder is configured to. In the example shown below the port has been set to 8080,
therefore the camera's URL is 192.168.1.195:8080
If the controlling PC and the encoder are on separate IP subnets and the encoder's IP address is
unknown run the
visualengineering.co.uk
Visual Engineering
Video solutions. Integrated
VE Camera Viewer application, which will find the IP address of the encoder.
August 2020
Page 31