Ethernet Menu; Http Ports - visual engineering MFR User Manual

Visual Engineering
MFR

Ethernet Menu

Network parameters can be set
on the encoder by selecting the
Ethernet menu.
The encoder can operate with a fixed
IP address, or can be allocated an
IP address from the network, these
modes are controlled using the
DHCP Enable/Disable button.
Users should press the submit
button to enable any changes.

HTTP Ports

The default HTTP port and ONVIF
HTTP port to control and configure
the camera is 80.
Selecting one of the five options as
shown in the drop down box on the
right will set both the HTTP port and
ONVIF HTTP port number.
Moving the encoder's HTTP port
number should only be carried out
by users confident of keeping a track
on what settings have been applied.
Setting a new IP address and new
HTTP port simultaneously should be
avoided.
Users should press the submit
button to enable any changes.
visualengineering.co.uk
Video solutions. Integrated
August 2020
Page 18