Controller Operation - Proluxe Impact X1 Operation Manual

Safety Summary
WARNING
In case of power cord damage,
do not attempt to repair or
replace the power cord. Contact
the manufacturer or the local
distributor.
WARNING
Avoid touching hot surfaces
while operating the machine.
CAUTION
During normal operation, the
base of the machine must be
installed or placed above the wall
socket.
CAUTION
When servicing or cleaning the
machine, make sure that the
power cord is removed from the
wall socket.
Operation Timer/Temperature
Control
Solid State Controller
This controller has three (3) control
features:
1. Temperature – Temperature may
be set from 100°-325°F (38°-
163°C)
2. Time – Time may be set from 1
second to 10 minutes.
3. Counter – Cycle counter counts
the number of applications from
1 to 9999
Counter).

Controller Operation

1. If the temperature is not being
displayed, press the MODE
button until temperature is
displayed.
2. Push and hold SET button and
simultaneously push UP ( ) or
DOWN ( ) arrow buttons to the
desired temperature setting.
3. Press the MODE button until
time is displayed.
4. Push and hold SET button and
simultaneously push UP ( ) or
DOWN ( ) arrow button to the
desired timer setting.
Dough Pressing Operations
SETTING CRUST THICKNESS
CONTROL:
Setting crust thickness is as simple as the
twist of a dial. By means of trial and
error, rotate the dial until desired
thickness is obtained. Note: Never
force the dial past its stop position or
damage could occur.
-3- DP3300 1410/20003/40002 5/03
(see additional Notes –