Related Manuals for Proluxe Endurance Pro X2
Summary of Contents for Proluxe Endurance Pro X2
- Page 1 Operations Manual Endurance Pro X2 - Dual Heat Semi-automatic Dough Press Model #: DP2010PID WWW.PROLUXE.COM Version: 41219...
- Page 2 Make sure there is a proper electrical wall outlet located within reach of the Proluxe equipment is a result of the cord and plug attached to the press. highest quality engineering and time- Then place the press in an area that tested design.
- Page 3 (A) Pull Pressing Handle for raising and lowering the upper platen. Proluxe shall not be liable for the This action forces the mating of injury, loss or damage, direct or the platens.
-
Page 4: Controller Operation
2. Counter – Cycle counter counts WARNING the number of applications from In case of power cord damage, 1 to 9999 (see additional Notes – do not attempt to repair or Counter). replace the power cord. Contact the manufacturer or the local 3. - Page 5 Dough Pressing Operations SETTING CRUST THICKNESS CONTROL: *The thickness is determined by dough Press Only Press & Par Bake weight and temperature setting on each Dough Press Press Temp Temp Product Time Time platen. 150°F 325°F 7-15 Pizza both both seconds seconds platens...
-
Page 6: Additional Notes
ADDITIONAL NOTES: Temperature No. DPPC1. (See our catalog and price list for information.) Note Note: This spray will not affect Fahrenheit/Centigrade (Celsius) the taste of your crust in any Conversion way. The temperature controller can be programmed to display either 6. - Page 7 International Symbols Preventative Maintenance Suggestions The Proluxe DP2010 machines are relatively maintenance free. For a long and trouble-free life, the following preventative maintenance should be followed: Daily Care: 1. Platens: These platens should only be cleaned with mild soap and warm water then wiped off with a clean, soft cloth or soft sponge.
- Page 8 EXPLOSION VIEW DP2010PID 04/03/18 40 3X 115 2X 76 4X EXPDP2010PID RC 032118 CUSTOMER MANUAL PAGE 1 OF 2...
- Page 9 52 4X 52 4X EXPDP2010PID RC 032118 CUSTOMER MANUAL PAGE 2 OF 2...
- Page 10 PROLUXE PARTS LIST FOR DP2010PID DP2010PIDE DP2010PIDCEC ITEM # DESCRIPTION QTY. 208 ~ AC 220 ~ AC HOUSING, MACHINED 1101781542205 1101781542205 LOCK PLUG, 5/8" ID DP17502 DP17502 CABLE STRAIN RELIEF 3231 3231 SCREW, SOCKET FLAT HEAD,1/4-20 X 3/4 SF142034 SF142034...
- Page 11 PROLUXE PARTS LIST FOR DP2010PID DP2010PIDE DP2010PIDCEC ITEM # DESCRIPTION QTY. 208 ~ AC 220 ~ AC NUT, HEX 6-32 NH632 NH632 WASHER, #6 INTERNAL TOOTH LOCK WLIT6 WLIT6 POWER DISTRIBUTION CABLE 11017815467 11017815467 WASHER, #8 INTERNAL TOOTH LOCK WLIT8...
- Page 12 PROLUXE PARTS LIST FOR DP2010PID DP2010PIDE DP2010PIDCEC ITEM # DESCRIPTION QTY. 208 ~ AC 220 ~ AC TERMINAL, RING #8 14-16 GA 1604 1604 TERMINAL, QD 3/16 X 18-22 GA 2280 2280 WASHER, SAE #6 WSAE6 WSAE6 TERMINAL, FEMALE MOLEX #BB-2141...
- Page 14 DOUGHPRO DP2000 Trouble Shooting Guide Symptom Probable Cause Action to be Taken Power Button on Digital Controller Power Cord is not plugged in. Plug power cord into wall 's receptacle face is depressed but doesn’t turn and depress power button on controller Circuit Breaker is tripped off in the Reset circuit breaker that the Grill is...
- Page 15 DOUGHPRO DP2000 Trouble Shooting Guide Symptom Probable Cause Action to be Taken Heater Platen overheating If the Relay (depending the year of Replace Relay If the Controller's heat- the model) on the coil side are on LED is not lit indicating the receiving 12vdc indicates the controller is working properly.
-
Page 16: Warranty And Return Policy
Exclusions: 1. WOOD / GAS FIRED OVENS: PROLUXE warranty applies to the main body of the oven being steel / refractory and insulation shall be free from defects in materials and workmanship for a period of four years from the date of purchase. The gas equipment shall be free from defects in materials and workmanship for a period of one (1) year from the date of purchase.
Need help?
Do you have a question about the Endurance Pro X2 and is the answer not in the manual?
Questions and answers