Advertisement
Also available; specify when ordering:
● Voltage : 120/208/240
● Amps : 12.5/11.1/16.5
● Watts : 1500/2300/1500
Includes: 72" cord and NEMA approved plug.
Shipping Weight:
200lbs. (91kg.) – DP1350
S A F E T Y S U M M A R Y
Warning
In case of power cord damage, do not
attempt to repair or replace the power cord.
Please contact the manufacturer or the local
distributor.
Avoid touching hot surfaces while operating
the machine.
Caution
During normal operation, the base of the
machine must be installed or placed above
the wall socket.
When servicing or cleaning the machine,
make sure that the power cord is removed
from the wall socket.
O P E R A T I O N T E M P E R A T U R E
& T I M E R C O N T R O L
Solid State Controller
This controller has three (3) control features:
1. T emperature – May be set from
100°-425°F (38°-163°C)
2. T ime – Time may be set from 1 second to
10 minutes.
3. C ounter – Cycle counter counts the
number of applications from 1 to 9999 (see
additional Notes – Counter).
4. " 2 Lower" (Fig. A) Refers to models using
upper and lower heated surfaces.
Controller Operation
1. V iewing the Modes of Operation :
To view the set points of temperature, timer
and counter, press MODE button to view the
desired mode of operation.
2. C hanging Temperature:
Press MODE button until temperature is
displayed.
Press and hold SET button while pressing the
UP (↑) and DOWN (↓) arrow buttons to
desired temperature setting.
3. C hanging Time:
Press MODE button until time is displayed.
FIG. A
2
Advertisement
