Advanced Settings - CanadianSolar CSI-25K-T400 Series Installation And Operation Manual

7. Operation
7.4.6 Yearly Energy
The function is for checking the energy generation for selected year.
YES=<ENT> NO=<ESC>
Figure 7.12 Select year for yearly energy
Press DOWN key to move the cursor to day and year, press UP key to change the digit.
Press Enter after the date is fixed.
2018: 0017513kWh
2017: 0165879kWh
Figure 7.13 Yearly energy
Press UP/DOWN key to move one date from another.
7.4.7 Daily records
The screen shows history of changing settings. Only for maintance personel.
7.4.8 Communication Data
The screen shows the internal data of the Inverter (see Figure 7.14), which is for service
technicians only.
01-05: 01 25 E4 9D AA
06-10: C2 B5 E4 9D 55
Figure 7.14 Communication Data
7.4.9 Warning Message
The display shows the 100 latest warning messages (see Figure 7.15). Screens can be scrolled
manually by pressing the UP/ DOWN keys. Press the ESC key to return to the previous menu.
Msg000:
T: 00-00 00:00 D:0000
Figure 7.15 Warning Message
.30.
Select: 2019
7.5 Advanced Settings - Technicians Only
NOTE:
To access to this area is for fully qualified and accredited technicians only.
Please follow 7.4 to enter password to access this menu.
Select Advanced Settings from the Main Menu to access the following options:
1. Select Standard 2. Grid ON/OFF
5. Power Control 6. Calibrate Energy 7. Special Settings
9.Restore Settings 10. HMI Update 11. External EPM set 12. Restart HMI
13. Debug Parameter 14.DSP Update 15.Compensation Set 16. I/V Curve
7.5.1 Selecting Standard
This function is used to select the grid's reference standard (see Figure 7.16).
YES=<ENT> NO=<ESC>
Standard:G59/3
Press the UP/DOWN keys to select the standard (G59/3, UL-480V, VDE0126, AS4777-15,
AS4777-02, CQC380A, ENEL, UL-380V, MEX-CFE, C10/11 and "User-Def" function).
Press the ENTER key to confirm the setting.
Press the ESC key to cancel changes and returns to previous menu.
NOTE:
This function is for technicians use only.
Selecting the "User-Def" menu will access to the following submenu (see Figure 7.17),
OV-G-V1: 400V
OV-G-V1-T: 1.0S
NOTE:
The " User-Def" function can be only used by the service engineer and
must be allowed by the local energy supplier.
7. Operation
3. Clear Energy 4. Reset Password
8. STD. Mode Settings
Figure 7.16
Figure 7.17
.31.