Overview; Front Panel Display; Led Status Indicator Lights; Keypad - CanadianSolar CSI-25K-T400 Series Installation And Operation Manual

3. Overview

3.1 Front Panel Display

Figure 3.1 Front Panel Display

3.2 LED Status Indicator Lights

Light Status
1 POWER
2 OPERATION
FLASHING
3 ALARM
Table 3.1 Status Indicator Lights

3.3 Keypad

There are four keys in the front panel of the inverter (from left to right):
ESC, UP, DOWN and ENTER keys. The keypad is used for:
scrolling through the displayed options (the UP and DOWN keys);
accessing or exiting submenus with adjustable settings (ESC and ENTER keys).

3.4 LCD

The two-line Liquid Crystal Display (LCD) is located on the front panel of the Inverter,
which shows the following information:
inverter operation status and data;
alarm messages and fault indications.
.6.
Description
The inverter can detect DC power.
ON
OFF No DC power or low DC power.
The inverter is operating properly.
ON
The inverter has stopped to supply power.
OFF
The inverter is initializing.
ON Alarm or fault condition is detected.
The inverter is operating without fault or alarm.
OFF
service messages for operator;

4. Product handing and storage

4.1 Product handling

Please review the instructions below for handling the inverter:
1. The red circles below denote cutouts on the product package.
Push in the cutouts to form handles for moving the inverter (see Figure 4.1).
Figure 4.1 move the inverter
2.Open the carton, then two people handle both sides of inverter through the area
denoted dotted line ( see figure 4.2).
Figure 4.2 Inverter handles
WARNING:
Be careful when lifting the inverter. The weight is approx 45kg.
3
.7.