Settings - CanadianSolar CSI-25K-T400 Series Installation And Operation Manual

7. Operation
Display
Duration
V_DC01: 0000.0V
10 sec
i_DC01: 0000.0A
V_A: 000.0V
10 sec
I_ A: 000.0A
V_C: 000.0V
10 sec
I_ C: 000.0A
Status: Generating
10 sec
Power: 0000W
Rea_Power: 0000Var
10 sec
App_Power: 0000VA
Grid Frequency
10 sec
F_Grid 00.00Hz
Total Energy
10 sec
0000000 kwh
This Month: 0000kwh
10 sec
Last Month: 0000kwh
Today: 00.0kwh
10 sec
Yesterday: 00.0kwh
Inverter SN
10 sec
00000000000000
Work Mode: NULL
10 sec
DRM NO.:08
I_PV01: +05.0A
I_PV02: +04.9A
10 sec
...
I_PV08: +05.2A
Table 7.1 Information list
.26.
Description
V_DC01: Shows input DC voltage.
I_DC01: Shows input DC current.
V_A: Shows the grid's voltage value.
I_A: Shows the grid's current value.
V_C: Shows the grid's voltage value.
I_C: Shows the grid's current value.
Status: Shows instant status of the Inverter.
Power: Shows instant output power value.
Rea_Power: Shows the reactive power of the inverter.
App_Power: Shows the apparent power of the inverter.
F_Grid: Shows the grid's frequency value.
Total generated energy value.
This Month: Total energy generated this month.
Last Month: Total energy generated last month.
Today: Total energy generated today.
Yesterday: Total energy generated yesterday.
Display series number of the inverter.
Work Mode: Shows current working mode.
DRM NO.: Shows DRM Number.
I_PV01 : Shows input 01 current value.
I_PV02 : Shows input 02 current value.
...
I_PV08 : Shows input 08 current value.
7.2.1 Lock screen
Pressing the ESC key returns to the Main Menu. Pressing the ENTER key locks
(Figure 7.2(a)) or unlocks (Figure 7.2 (b)) the screen.
(a)
Figure 7.2 Locks and Unlocks the Screen of LCD

7.3 Settings

The following submenus are displayed when the Settings menu is selected:
1. Set Time
2. Set Address
7.3.1 Set Time
This function allows time and date setting. When this function is selected, the LCD will
display a screen as shown in Figure 7.3.
NEXT=<ENT> OK=<ESC>
01-01-2019 16:37
Figure 7.3 Set Time
Press the UP/DOWN keys to set time and data. Press the ENTER key to move from one
digit to the next (from left to right). Press the ESC key to save the settings and return to
the previous menu.
7.3.2 Set Address
This function is used to set the address when multiple inverters are connected to the
monitoring system/control system.
The address number can be assigned from "01"to "99"(see Figure 7.4). The default address
number of Canadian Solar Three Phase Inverter is "01".
YES=<ENT> NO=<ESC>
Set Address: 01
Figure 7.4 Set Address
Press the UP/DOWN keys to set the address. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
7. Operation
(b)
.27.