Running Message; Version; Daily Energy; Monthly Energy And Yearly Energy - CanadianSolar CSI Series Installation And Operation Manual

6. Operation

6.4.2 Running Message

This function is for maintaince person to get running message such as internal temperature,
Standard NO. etc.
Screens can be scrolled manually by pressing the UP/DOWN keys.

6.4.3 Version

The screen shows the model version and the software version of the Inverter
(see Figure 6.7).
Software Version: D20001
Figure 6.7 Model Version and Software Version

6.4.4 Daily Energy

The function is for checking the energy generation for selected day.
YES=<ENT> NO=<ESC>
Select:
Figure 6.8 Select date for daily energy
Press DOWN key to move the cursor to day, month and year, press UP key to change the
digit. Press Enter after the date is fixed.
2015-02-22: 051.3kWh
2015-02-23: 061.5kWh
Figure 6.9 Daily energy
Press UP/DOWN key to move one date from another.

6.4.5 Monthly Energy and Yearly Energy

The two functions are for checking the energy generation for selected month and Year
YES=<ENT> NO=<ESC>
Select: 2015-02
Figure 6.10 Select month for monthly energy
.28.
Model: 08
2015-02-23
YES=<ENT> NO=<ESC>
Select: 2015
Figure 6.11 Select year for yearly energy
Press DOWN key to move the cursor, press UP key to change the digit.
Press Enter after the month/year is fixed.
2015-02: 0510kWh
2015-01: 0610kWh
Figure 6.12 Month energy
Press UP/DOWN key to move one date from another.

6.4.6 Daily record

The screen shows history of changing settings. Only for maintance personel.

6.4.7 Communication Data

The screen shows the internal data of the Inverter (see Figure 6.14), which is for service
technicians only.
01-05: 01 25 E4 9D AA
06-10: C2 B5 E4 9D 55
Figure 6.14 Communication Data

6.4.8 Warning Message

The display shows the 100 latest warn messages (see Figure 6.15). Screens can be scrolled
manually by pressing the UP/ DOWN keys. Press the ESC key to return to the previous menu.
Msg000:
T: 00-00 00:00 D:0000
Figure 6.15 Warning Message
6.5 Advanced Settings - Technicians Only
NOTE:
To access to this area is for fully qualified and accredited technicians only.
Please follow 6.4 to enter password to access this menu.
Select Advanced Settings from the Main Menu to access the following options:

1. Select Standard

2. Grid ON/OFF

5. Power Control 6.Calibrate Energy 7.Special Settings
9.Restore Settings 10.HMI Update 11.Export Power Set 12.Restart HMI
13.Debug Parameter 14.DSP Update 15.Power Parameter
6. Operation
2015: 0017513kWh
2014: 0165879kWh
Figure 6.13 Yearly energy
3.Clear Energy 4. Reset Password
8.STD. Mode Settings
.29.