ENGLISH
E - Fasten the bottles to the cabinet by using the relative chains or springs (POS.E), (See
Pict.16).
F - Connect the nut of the protoxide reducer pipe to the protoxide supplying nipple set
on the top of the flow-meter box, (See Pict. 16) and TIGHTEN by a 18 mm wrench.
G - Connect the nut of the Oxygen reducer pipe to the Oxygen supplying nipple set in
the low part of the flow-meter box, (See Pict. 16) and TIGHTEN by a 18 mm wrench.
H - Close the rear door by screwing the wing nuts (Pos. A,B), (See pict. 15).
Pct. 9
Pct. 8
Pct.12
Pct. 10
Pct. 11
19