Extech Instruments MA1500 User Manual page 2

Introduction
Safety
International Safety Symbols
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOLTAGE CATEGORY I
Note – Examples include protected electronic circuits.
OVERVOLTAGE CATEGORY II
Note – Examples include household, office, and laboratory appliances.
OVERVOLTAGE CATEGORY III
Note – Examples include switches in the fixed installation and some equipment for industrial use with
permanent connection to the fixed installation.
OVERVOLTAGE CATEGORY IV
Note – Examples include electricity meters and primary over-current protection equipment
Find Quality Products Online at:
Congratulations on your purchase of this MA1500 True RMS Clamp Meter. This meter measures
AC Current, DC Current, AC/DC Voltage, Resistance, Capacitance, Frequency, Diode Test, Duty
Cycle and Continuity. The molded case is designed for heavy duty use. This meter is shipped fully
tested and calibrated and, with proper use, will provide years of reliable service.
This symbol, adjacent to another symbol or terminal, indicates the user must refer
to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous
voltages may be present
Double insulation
This WARNING symbol indicates a potentially hazardous situation, which if not
WARNING
avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
CAUTION
avoided, may result damage to the product.
Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in which
measures are taken to limit the transient overvoltages to an appropriate low level.
Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from
the fixed installation.
Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.
Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the installation.
GlobalTestSupply
www.
2 MA1500-en-GB_v1.4 10/18
.com
sales@GlobalTestSupply.com