Advertisement
19
en | Installing
5.2
Unmounting
NOTICE!
i
To remove the AMC2 from a mounting rail, first, remove all
pluggable connectors.
Push down the AMC2 until the lower edge snaps out of the
mounting rail [1]. Pull the lower end of the AMC2 from the
mounting rail [2].
Figure 5.2 Unmounting the AMC2 device from a mounting rail
| V 2.6 | 2008.12
Installation manual
AMC2 4W-EXT
Bosch Sicherheitssysteme GmbH
Advertisement
