7 DMX signal connecting................7 8 Connection scheme...................8 9 Dimensions....................10 10 Technical data..................10 Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-2 BDO register number 000005972 www.pxm.pl...
Setting the DMX address and the activation of the Smooth function is possible by using DIP Switch control. In addition to controlling LED stripes, PX342 can also be used to control the speed of DC motors using the DMX512 protocol.
6. PX342 should be strictly protected against contact with water and other liquids. 7. All sudden shocks, particularly dropping, should be avoided. 8. The device cannot be turned on in places with humidity exceeding 90%. 9. The device cannot be used in places with temperature lower than +2°C or higher than +40°C.
Smooth function PX342 is equipped with a useful Smooth function. It is activated by changing the position 10 of the DIP Switch to the ON position. DMX ADDRESS This makes it possible to smooth DMX values with rapid changes. This option eliminates the phenomenon of "light vibrations".
DMX address setting PX342 allows for setting the DMX address. The address is set in a binary code using the DIP Switch. Below are some examples of setting the DMX address. The first 9 switches are responsible for the DMX address, switch 10 is responsible for activating the Smooth function.
PX324 have to be connected to DMX line in serial mode, with no branches on DMX control cable. That means that DMX line, from the signal source, must be connected to DMX IN pins of PX342 and later, directly from DMX OUT pins to the next device in DMX chain.
Dimensions 2 3 4 5 6 7 8 9 58 mm 35 mm 10 Technical data type PX342 DMX channels number of output channels power supply 12 – 24V DC output current carrying capacity max. 10A no load power consumption max.
Page 11
Podłęże, 01.07.2020 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: Driver LED C.V. 1 x 10A Product code: PX342 meets the requirements of the following standards, as well as harmonised...
Need help?
Do you have a question about the PX342 and is the answer not in the manual?
Questions and answers