Control Panel Key Part Names And Functions - GRAPHTEC GL400 User Manual

2.5 Control Panel Key Part Names and Functions

This section describes the control panel keys.
CH GROUP key .................. Switches between channel groups.
RANGE/SPAN/POSITION key
.................................. Switches through the RANGE, SPAN, and POSITION settings on the
TIME/DIV key ...................... Used to switch the time axes.
QUIT key ............................. Used to cancel the displayed setting item. It is also used to cancel the
MENU key ........................... Switches through the various setting menus.
Direction keys (
Direction keys (
ENTER key ......................... Enters the details set in the current setting window.
DISPLAY key ...................... Switches through the Waveform, Enlarged Waveform, and Digital Data
REVIEW key ....................... Replays the captured data.
SAVE key ............................ Used to save data and make a copy of the displayed screen.
CURSOR key ...................... Used to switch through the Single Cursor, Dual Cursor, and Off
START/STOP key ............... Press this key to start measurement or to stop measurement when
CH GROUP
CH GROUP
TIME
QUIT
QUIT
LOCAL
ENTER
ENTER
DISPLAY
DISPLAY REVIEW
SAVE
SAVE CURSOR
CURSOR
monitor display. These settings can be specified for each channel.
REMOTE status.
) ....... These keys move the cursor on the screen in the direction indicated.
) ....... Press these keys to scroll the memory data waveforms and move the
cursor. Hold down both keys together for at least three seconds to
enable key lock status. To cancel key lock status, press them again for
at least three seconds.
screens.
settings.
measurement is in progress.
RANGE/SPAN/POSITION
RANGE SPAN
/
POSITION
TIME/DIV
DIV
/
MENU
MENU
Direction keys
REVIEW
START
START STOP
STOP
Checks and Preparation
2-5