Settings and Measurement
y y y y y I/F Settings Window
The conditions for connecting to your computer are set here.
New Line Code
Echo Back
USB ID
IP Address
Subnet Mask
Port Number
New Line Code ................... Sets the new line code. Select from CR+LF, LF, or CR.
Echo Back ........................... This function can be specified as Enable or Disable.
USB ID Setting .................... Sets the ID number for the GL400. Specify a number from 0 to 7.
TCP-IP Settings .................. Sets the TCP-IP.
CHECKPOINT
Be sure to restart the GL400 after settings have been made or changed. If the GL400 is used as is, the
computer connections may not be performed correctly.
3-22
Setting
CR+LF, LF, CR
Enable, Disable
0 to 7
Numeric setting
Numeric setting
Numeric setting
IP Address:
Subnet Mask: Sets the subnet mask.
Port Number: Sets the port number.
Selections available
Sets the IP address.
Setting method
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER