Table of Contents
Advertisement
Trigger
The trigger Start/Stop settings are made here.
(1) Trigger Settings
Start
• Function: Sets the Data Capture Start condition.
• Alarm Output: Selects the alarm output when the Function is Alarm.
Stop
• Function: Sets the Data Capture Stop condition.
Alarm Output: Selects the alarm output when the Function is Alarm.
Time:
Off:
No trigger is used. Instead, measurement is initiated by pressing the
START/STOP key.
Level:
The start of measurement is triggered when the trigger condition is
satisfied.
Alarm:
The start of measurement is triggered with the alarm condition is
satisfied.
External: The start of measurement is triggered when a signal is input from an
external trigger terminal.
Off:
No trigger is used. Instead, measurement is stopped by pressing the
START/STOP key.
Level:
Measurement is stopped when the trigger condition is satisfied.
Alarm:
Measurement is stopped when the alarm condition is satisfied.
External: Measurement is stopped when a signal is input from an external trigger
terminal.
Time:
Sets the amount of time from the start until the end of measurement. (The
time can be specified in 1- second increments).
Sets the end time when "Function" and "Time" have been set.
Software
4-21
Advertisement
Table of Contents
