GRAPHTEC GL400 User Manual page 50

r r r r r ALM Settings Window
The Alarm and Trigger settings are made here.
Setting
Combination OR, AND
Mode H, L, Win In, Win Out
Lower - Level - Upper Numeric settings
Output 1 to 4
Pulse
• Mode L, H, Win In, Win Out
• Lower - Level - Upper Numeric settings
• Output 1 to 4
Logic
• Mode X, L, H
• Output 1 to 4
Trigger
• Start Off, Level, Alarm, Ext.
Alarm output selection: 1 to 4
• Stop Off, Level, Alarm, Ext., Time
Alarm output selection: 1 to 4
Time setting: 1 s to 9999 h
Combination
Determines the alarm output conditions. The logic alarm cable (B-513, option) is required for alarm
output.
OR ...................................... Outputs an alarm when each alarm condition is met.
AND .................................... Outputs an alarm when all of the alarm conditions are met.
Condition settings
Mode ................................... Determines the alarm output condition
Selections available
Off: The alarm function is disabled.
H: An alarm is generated when the signal input rises to (or exceeds)
the specified alarm level.
CH.1
Settings and Measurement
Setting method
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
ENTER→Select→ENTER
Alarm generated
3-17