Table of Contents
Advertisement
Settings and Measurement
SPAN settings
20 mV
50 mV
100 mV
200 mV
500 mV
1 V
Temperature*
*1 When 1-5V has been specified and the range is changed, it becomes a
please select 1-5V for the range setting once again.
*2 With the temperature ranges, the measurement range will depend on the type of sensors used. If you want to
make detailed settings, please set the range again.
POSITION settings
If the ENTER key is pressed when POSITION has been selected, the position can be moved.
Voltage ranges:
Temperature ranges: In 10% units of the following ranges:
(3) TIME/DIV key
Press the TIME/DIV key to switch through the waveform display speeds.
1 • 2 • 5 • 10 • 20 • 30 • 1 • 2 • 5 • 10 • 20 • 30 • 1 • 2 • 5 • 10 • 12 • 24
(4) START/STOP key
Press the START/STOP key to select the START status (Armed). Press it once again to select the
STOP status (Free Running).
3-4
0.200 to 40.000 mV/F.S.
0.50 to 100.00 mV/F.S.
1.00 to 200.00 mV/F.S.
2.00 to 400.0 mV/F.S.
5.0 to 1000.0 mV/F.S.
0.0100 to 2.0000 V/F.S.
2
50.0 to 2200.0 °C/F.S.
In 10% units of the range
50.0, 100.0, 200.0, 500.0, 1000.0, 2000.0
sec/DIV
min/DIV
TIME/DIV display
2 V
0.0200v4.000 V/F.S.
5 V
0.050 to 10.000 V/F.S.
10 V
0.100 to 20.000 V/F.S.
20 V
0.200 to 40.000 V/F.S.
50 V
0.50 to 100.00 V/F.S.
1
1-5 V*
0.040 to 4.000 V/F.S.
±
range. If the 1-5V range is required,
hour/DIV
Advertisement
Table of Contents
