Advertisement
1) If your Proximity watch is actively connected to your iPhone®, disconnect the Bluetooth connection:
Pull the crown out one click and rotate to move the mode hand to 'DCT' mode.
back in one click. After a few seconds, your Proximity watch will disconnect.
2) Pull the crown out one click, then rotate the crown to move the mode hand to the 'TME' mode.
the crown in one click.
3) Clear any stored pairing information from your Proximity watch:
Press and hold the upper right button for 7 to 8 seconds until the second hand makes a full revolution.
4) Delete the original Proximity App from your iPhone®
a) Tap and hold the Proximity App icon until an 'X' appears in the upper left corner.
b) Tap on the
c)A message will show asking you to confirm deleting the App. Tap on 'Delete' .
d) Press and release the iPhone® home button to exit 'Delete/Move' function.
5) Delete the Proximity Bluetooth® device from your iPhone®:
Tap on iPhone® Settings:
Tap on Bluetooth:
Tap the
to the right of the Eco-Drive Proximity device.
Tap on 'Forget this Device' at the top of the screen.
Tap on 'Forget Device' in red at the bottom of the screen.
Tap on
in the upper left corner of the screen.
Press and release the home button on your iPhone® to exit Settings.
6) Download the Proximity App v2.5 from the App Store. App v2.5 features a blue icon:
7) Tap on and open the Citizen Eco-Drive Proximity App v2.5
STEPS FOR FIRMWARE UPDATING
to delete the Proximity App.
(white icon):
Push the crown
Push
continued next page
Advertisement
