Advertisement
88) How do I get the second hand to move? It is
stopped at the 9:00, 10:00 or 11:00 position.
89) I got an e-mail notification, then got a call. The
second hand moved to the 11:00 position (CALL)
rather than staying at the 10:00 position (MAIL).
Why does this happen?
90) Do I have to be connected to Wi-Fi for my
Proximity watch and App to function?
91) Do I have to have a cellular connection for
Proximity watch and App to function?
92) Do I have to turn the App off at night?
93) Why am I not getting any e-mail notifications?
94) What is the difference between 'TME' and 'CT'
modes? After the phone has been paired, they seem
to have the same functionality. Should I leave my
watch in 'TME' or 'CT' mode for day-to-day use?
Proximity FAQ
This means you had an event alert (e-mail, calendar,
call or Bluetooth® link loss). Be sure you are not in
the calendar (CAL), chronograph (CHR) or zero
position(>0<') modes.
Then, press and hold either button for two seconds
to clear an alert, then release. Your second hand will
resume normal operation.
The alert feature is based on the 'last event' detected
by the Proximity App. The second hand will move
to the last event detected by the App.
A Wi-Fi connection is not required. The Proximity
watch and App communicate via Bluetooth® 4.0
wireless technology featured on the iPhone® 4S and
higher.
A cellular connection is needed only for the Call
alert feature as without a cellular connection, a call
cannot be received. A Wi-Fi or Cellular connection
is needed to receive e-mail alerts.
We recommend that you close the Proximity App
when not in use. As with any other App, when
the App is running, it may place a drain on your
iPhone® resources.
Be sure you have an active Bluetooth® connection
between your watch and iPhone®, and that you have
setup your IMAP e-mail account in the Proximity
App v2.0.
Be sure that the E-mail Alert preference is turned
'ON' , for both e-mail alerts and the desired IMAP
e-mail account for which you wish to be notified.
The 'TME' or time mode is for setting or during
every day wear to show the time on your Proximity
watch.
The 'CT' or connect mode is used when
reconnecting a previously paired iPhone®. In 'CT'
mode, the time will be displayed on your Proximity
watch as normal.
Page 19
Advertisement
