Advertisement
129) (continued from previous page) After installing
the App, I am able to successfully pair my iPhone 5 or
higher, but after a loss of Bluetooth® communication,
I cannot reconnect. I have SCAN turned "ON" in
the App, the iPhone® 5 or higher screen dims and
turns bright, but "Scan" never changes to "Proximity
Connect" in the Proximity App and a Bluetooth®
reconnection never occurs. How do I reconnect?
Proximity FAQ
continued from previous page:
A pairing notification will appear on your iPhone®
o
Tap on Pair
o
The watch and iPhone will pair
o
You should now see 'Proximity Connect' on your
o
Proximity App and the hand at the 2:00 sub dial on
your watch should now be indicating between 1:00
and 6:00.
If you get an immediate Link Loss notification on
o
your watch after pairing:
To Finalize setting:
This completes this procedure
Press and hold the upper right button for
o
2-3 seconds to clear the notification on
your Proximity Watch
Make sure Scan is 'ON' in the Proximity
o
App.
Press and release the upper right button to
o
initiate a connection.
You should now see 'Proximity Connect'
o
on your Proximity App and the hand at
the 2:00 sub dial on your watch should now
be indicating between 1:00 and 6:00.
On your Proximity watch, Pull the crown
o
out one 'click"
Rotate the crown to change modes to the
o
TME (Time) mode
Push the crown in one 'click'
o
Page 28
Advertisement
