Advertisement
135) What is new in firmware v2.0?
136) Is firmware v2.0 compatible with iOS5, iOS6
and iOS7?
137) What is new in App v2.0 (released January 15)?
138) Are there any different processes to be aware of
with Firmware v2.0 and Firmware 2.5?
Proximity FAQ
Firmware v2.0 prepares your Proximity watch
for future firmware updates via the Bluetooth®
connection and an updated Proximity App due
March 2014. It also prevents "double pairing" of the
Proximity watch and iPhone.
Yes, firmware v2.0 is compatible with iOS5, iOS6
and iOS7. Please note that to take advantage of
the Bluetooth® firmware updating feature that
was released March 2014 (firmware v2.5 with
App v2.5), your iPhone® must be running iOS7 or
higher. Firmware v2.0 can be updated through
the Bluetooth® connection and App v2.5 (released
March 2014)
Functionally, you will notice no differences in the
App but there are some minor behind the scenes
enhancements. The difference you may notice is on
the main screen of the App, you will see a "firmware
version" at the bottom of the App screen when
there is an active Bluetooth® connection between
your Proximity watch and iPhone®.
Yes, there is a procedural change associated with
the watch when changing iPhones, using multiple
iPhones, restoring your phone or if you delete the
Proximity Bluetooth® device from the iPhone®
settings. With firmware v2.0 forward you will need
to delete the pairing information from the watch
itself as well as the iPhone®. To delete the pairing
information from the Proximity watch:
o
crown to change the operating mode to "TME" as
indicated by the 6:00 sub dial hand.
o
position next to the case. Wait 5 seconds.
(CONTINUED NEXT PAGE)
Pull the crown out one 'click' and rotate the
Push the crown in one 'click' to the closed
Page 31
Advertisement
