Settings - KYOWA WGA-680A Instruction Manual

(15) [LCK]
Contents:
Format:
Parameter:
Return value format:
Description and others:

2-7-4. Settings

(16) [VCL]
Contents:
Return value format:
Parameter:
Return value format:
Description and others:
Reading command:
Return value:
(17) [EIC]
Contents:
Format:
Parameter:
Return value format:
Description and others:
Reading command:
Return value:
(18) [VRC]
Contents:
Format:
Parameter:
Return value format:
Description and others:
Reading command:
Return value:
To set key locks
LCKa<CR>
a
0: OFF
1: ON
ok<CR><LF>
The settings of the command will be disabled after turning OFF the power.
To execute actual read calibrations
VCL±yyyyyy<CR>
±yyyyyy
Rated value: -99999 to 99999
ok<CR><LF>
The results of the command will be saved.
PRR010
For details, see the [EIC].
To execute sensitivity registering calibrations
EIC±x.xxxx, ±yyyyyy<CR>
±x.xxxx, ±yyyyyy
ok<CR><LF>
The results of the command will be saved.
PRR010
±x.xxxx, ±yyyyyy<CR><LF>
To execute numeric value registering calibrations
VRC±x.xxxx<CR>
±x.xxxx
ok<CR><LF>
The results of the command will be saved.
PRR011
±x.xxxx<CR><LF>
The value, including the decimal point. When the value has no
decimal point, it is filled with "0s" from the head.
E-00<CR><LF> (When an error occurs)
Rated value: -99999 to 99999
The value, including the decimal point. When the value has
no decimal point, it is filled with "0s" from the head.
Rated output: -3.2000 to 3.2000 (mV/V)
E-00<CR><LF>(When an error occurs)
Rated value: -99999 to 99999 (count)
The value, including the decimal point. When the value has
no decimal point, it is filled with "0s" from the head.
Rated output: -3.2000 to 3.2000 (mV/V)
Initial value of transducers: -3.2000 to 3.2000 (mV/V)
E-00<CR><LF>(When an error occurs)
Initial value of transducers: -3.2000 to 3.2000 (mV/V)
25
IM-A-1060G