Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Page 1 of 21
FITTING INSTRUCTIONS FOR LP0277BK LICENCE PLATE BRACKET
(FOR USE WITH STANDARD AND R&G MINI INDICATORS (8mm))
T
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS OR
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
I
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
YAMAHA XTZ 700 (TENERE) 2019-
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
HAVE FITTED BY A QUALIFIED TECHNICIAN.
MOUNTING TO THE BIKE
THESE RUBBER WASHERS CAN BE THROWN AWAY
WWW.RG-RACING.COM
.
R&G
www.rg-racing.com
LP0277
.
.
.
.
,
.
Email:
info@rg-racing.com
Advertisement
Table of Contents
Related Manuals for R&G LP0277BK
Summary of Contents for R&G LP0277BK
- Page 1 Page 1 of 21 LP0277 FITTING INSTRUCTIONS FOR LP0277BK LICENCE PLATE BRACKET YAMAHA XTZ 700 (TENERE) 2019- (FOR USE WITH STANDARD AND R&G MINI INDICATORS (8mm)) HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY...
-
Page 2: Tools Required
Page 2 of 21 LP0277 TOOLS REQUIRED GENERAL TORQUE SETTINGS • M4 BOLT = 8Nm Set of metric Allen keys to include 3, 4 & 5mm A/F size. M5 BOLT = • 10mm spanners or socket and wrench. M6 BOLT = •... -
Page 3: Assembly Diagram
Page 3 of 21 LP0277 ASSEMBLY DIAGRAM PICTURE 1 PICTURE 2 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com... - Page 4 Page 4 of 21 LP0277 PICTURE 3 PICTURE 4 PICTURE 5 PICTURE 6 PICTURE 7 PICTURE 8 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 5 Page 5 of 21 LP0277 PICTURE 9 PICTURE 10 PICTURE 11 PICTURE 12 PICTURE 13 PICTURE 14 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 6 Page 6 of 21 LP0277 PICTURE 15 PICTURE 16 PICTURE 17 PICTURE 18 PICTURE 19 PICTURE 20 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 7 Page 7 of 21 LP0277 PICTURE 21 PICTURE 22 PICTURE 23 PICTURE 24 PICTURE 25 PICTURE 26 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 8 Page 8 of 21 LP0277 PICTURE 27 PICTURE 28 PICTURE 29 PICTURE 30 PICTURE 31 PICTURE 32 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
-
Page 9: Fitting Instructions
Page 9 of 21 LP0277 FITTING INSTRUCTIONS • Remove the passenger seat using the key as arrowed in picture 1. • Remove the two bolts arrowed in picture 2 and remove the rider’s seat. • Remove the five bolts arrowed in picture 3. •... - Page 10 Page 10 of 21 LP0277 To continue • Feed the wires of the new R&G licence plate illuminator (item 10) through the central hole in the new licence plate bracket (item 1) as shown in pictures 29 and 30. • Secure using the washers and nut supplied as shown in picture 30.
- Page 11 Page 11 of 21 LP0277 CONSUMER NOTICE The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes.
- Page 12 Page 12 of 21 LP0277 NOTICE DE MONTAGE POUR LP0277BK SUPPORT DE PLAQUE YAMAHA XTZ 700 (TENERE) 2019- (POUR MINI CLIGNOTANTS R&G (8mm) ET CLIGNOTANTS STANDARDS) E KIT CONTIENT LES ARTICLES EXPOSES CI DESSOUS VERIFIER QUE TOUTES LES PIECES SOIENT PRESENTES AVANT DE PROCEDER AU MONTAGE A FAÇON DONT LE KIT EST EMBALLE NE CORRESPOND PAS FORCEMENT A LA FAÇON DE MONTER LES PIECES SUR LA MOTO...
-
Page 13: Outils Requis
Page 13 of 21 LP0277 OUTILS REQUIS VALEURS DE SERRAGE • M4 BOULON = 8Nm Clés Allen 3, 4 & 5mm. M5 BOULON = • Clé à cliquet + douille 10mm M6 BOULON = • Clés Torx T30 et T40 M8 BOULON = 20Nm •... - Page 14 Page 14 of 21 LP0277 SCHEMA R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
-
Page 15: Notice De Montage
Page 15 of 21 LP0277 NOTICE DE MONTAGE • Enlevez le siège du passager en utilisant la clé comme indiqué sur la photo 1. • Retirez les deux boulons marqués d’une flèche sur la photo 2 et retirez la selle du pilote. •... - Page 16 Page 16 of 21 LP0277 Suite • Faites passer les fils du nouveau feu de plaque d'immatriculation R&G (article 10) dans le trou central du nouveau support de plaque d'immatriculation (article 1), comme indiqué sur les photos 29 et 30. •...
- Page 17 Page 17 of 21 LP0277 MONTAGEANLEITUNG FÜR LP0277BK KENNZEICHENHALTER YAMAHA XTZ 700 (TENERE) 2019- (VERWENDUNG MIT STANDARD UND R&G MINIBLINKER (8mm)) EILE SIND UNTEN ABGEBILDET UND GEKENNZEICHNET IE ABGEBILDETEN EILE DIENEN LEDIGLICH ZUR RKLÄRUNG Ü BERPRÜFEN IE ZUERST DASS ALLE...
-
Page 18: Sie Benötigen Folgendes Werkzeug
Page 18 of 21 LP0277 WWW.RG-RACING.COM SIE BENÖTIGEN FOLGENDES WERKZEUG ALLGEM ANZUGSDREHMOMENTE • M4 SCHRAUBE = 8Nm Satz Inbusschlüssel inkl. Größe 3, 4 & 5mm M5 SCHRAUBE = • 10 mm Steckschlüssel oder Schraubenschlüssel M6 SCHRAUBE = • Satz Torx-Schlüssel inkl. T30 und T40 M8 SCHRAUBE = 20Nm •... - Page 19 Page 19 of 21 LP0277 ZEICHNUNG ZUSAMMENBAU R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 20 Page 20 of 21 LP0277 MONTAGEANLEITUNG • Entfernen Sie den Soziussitz (der Schlüssel wird benötigt) wie in Abbildung 1 abgebildet. • Entfernen Sie die zwei Schrauben, die in Abbildung 2 gekennzeichnet sind und entfernen Sie den Fahrersitz. • Entfernen Sie die fünf Schrauben, die in Abbildung 3 markiert sind. •...
- Page 21 Page 21 of 21 LP0277 Fortsetzung • Führen Sie die Kabel für die neue R&G Kennzeichenbeleuchtung (Artikel 10) durch die mittlere Öffnung im neuen Kennzeichenhalter (Artikel 1) wie in den Abbildungen 29 und 30 abgebildet. • Mit den Unterlegscheiben und Muttern vom Kit sichern wie in Abbildung 30 abgebildet. •...
Need help?
Do you have a question about the LP0277BK and is the answer not in the manual?
Questions and answers