Installing Hard Disk & Memory, Pci Devices - Avalue Technology VMS-APL Quick Reference Manual

VMS-APL
2.5 Installing Hard Disk & Memory, PCI devices
2B
Step 1. Remove 11 screws from the bottom of your system and take it off.
Step 2. Slide the DDR3L SODIMM into the memory socket and press it down until properly seated.
Step 3. Insert MPCIE cards into designated locations and fasten with 4 screws to complete MPCIE
installation.
Step 1. Unfasten 2 screws from the HDD bracket and take it off.
Step 2. Remove 4 screws to release the HDD bracket.
Step 3. Slide HDD into its bracket until properly seated.
Step 4. Secure HDD by means of 4 screws.
Step 5. Insert HDD bracket into designated locations and fasten with 2 screws to complete HDD installation.
38 VMS-APL Quick Reference Guide