Table of Contents
Advertisement
EMS-SKLU/EMS-SKLU-Marine
2.14
Installing Hard Disk & Memory, PCI devices (EMS-SKLU)
Step 1. Remove 4 screws from the bottom of your system and take it off.
Step 2. Slide the DDR4 SODIMM into the memory socket and press it down until properly seated.
Step 3. Insert MPCIE card into designated locations and fasten with 2 screws to complete MPCIE installation.
Step 4. Insert M.2 B-Key card into designated locations and fasten with a screw to complete installation.
Step 1. Unfasten 2 screws from the HDD bracket and take it off.
Step 2. Remove 4 screws to release the HDD bracket.
Step 3. Slide HDD into its bracket until properly seated.
Step 4. Secure HDD by means of 4 screws.
Step 5. Insert HDD bracket into designated locations and fasten with 2 screws to complete HDD installation.
48 EMS-SKLU/EMS-SKLU-Marine Quick Reference Guide
Advertisement
Table of Contents
