Installing Hard Disk & Memory (Eps-Qm67E) - Avalue Technology EPS-QM67E Quick Reference Manual

Quick Reference Guide
2.3 Installing Hard Disk & Memory (EPS-QM67E)
Step 1. Remove 8 screws from the bottom of your system.
Step 2. Remove the chassis cover.
Step 1. Slide HDD into its bracket until properly seated.
Step 2. Secure HDD by means of 4 screws.
Step 3. Connect necessary cables to the HDD
Step 4. Slide the DDR3 SODIMM into the memory socket and press it down to seat it properly.
EPS-QM67E Quick Reference Guide 15