Sp600A-Sp611A - Black Box SP141A Manual

IN-LINE SURGE PROTECTORS
3.31 2-, 4-, 6-, 8-, 10-, and 32-Wire Terminal Strip Protectors

(SP600A-SP611A)

If you have a terminal-strip protector for RS-232
and Token Ring or RS-422, RS-423, RS-485, and
Ethernet (part numbers SP600A-SP611A), follow
these instructions to install your unit:
1. Insert the protector in series between the
incoming data cable and the communications
port on the equipment you wish to protect.
2. Attach the protector's grounding wire
directly to the metal chassis of the
equipment.
You must attach the ground terminal to earth/chassis
ground through a grounded AC power receptacle to assure
effective protection.
5 0
CAUTION