Sp522A-R2 - Black Box SP141A Manual

IN-LINE SURGE PROTECTORS

3.23 SP522A-R2

This model protects RJ-45 8-wire UTP Token Ring
devices. It also protects RJ-45 8-wire RS-232
devices.
1. Disconnect the data cable from the device to
which you wish to connect the protector.
2. Plug the RJ-45 male pigtail into the RJ-45
receptacle on the device you wish to protect.
3. Attach the green ground wire to the device
chassis if the chassis is metal. This ground is
extremely important and must be connected
for the protector to function properly.
If you do not connect this ground correctly, you might
damage your equipment.
4. Attach the data cable to the protector.
5. Velcro fasteners are included for mounting.
3 8
CAUTION