Sp501A - Black Box SP141A Manual

IN-LINE SURGE PROTECTORS

3.3 SP501A

This model replaces the standard T connector on
the network interface card (NIC) to protect the
attached workstation from surges.
1. Remove the old T connector.
2. Attach the surge protector to the NIC.
3. Connect the ground wire on the protector to
the equipment chassis.
Fig. 3-2. Typical Application of the SP501A or SP504A.
1 6
BNC
on
NIC
Ground
Wire
Network
Coax
SP501A
SP504A
Network
Coax