Total Filter Currents - ABB PQFS Installation, Operation And Maintenance Instructions

7.8.2.3.1 Waveforms
The filter current waveforms for all phases for the unit selected with the 'Select unit'
option. The graph layout is similar to the one of the voltages
are synchronized with the rising edge zero crossing of the voltage V (L1-N) (4-W mode)
or V (L1-L2) (3-W mode).
7.8.2.3.2 Spectrum
The filter current spectrum for all phases (3-W mode) and the neutral current spectrum
(4-W mode) in chart format for the unit selected with the 'Select unit' option. The chart
layout is similar to the one of the voltages
absolute terms.
7.8.2.3.3 Harmonic table
The filter current spectrum for all phases (3-W mode) and the neutral current spectrum
(4-W mode) in table format for the unit selected with the 'Select unit' option. The table
layout is similar to the one of the voltages
are shown.

7.8.2.4 Total filter currents

Refer to Table 39
PQF Irms in table format for the complete filter system.
7.8.2.4.1 Waveforms
The filter current waveforms for all phases for the complete filter system. The graph
layout is similar to the one of the voltages
with the rising edge zero crossing of the voltage V (L1-N) (4-W mode) or V (L1-L2) (3-W
mode).
7.8.2.4.2 Spectrum
The filter current spectrum for all phases (3-W mode) and the neutral current spectrum
(4-W mode) in chart format for the complete filter system. The chart layout is similar to
the one of the voltages
7.8.2.4.3 Harmonic table
90 The PQF-Manager user interface  Manual Power Quality Filter PQFS
for an explanation of the parameters.
(Figure 61) but the values are expressed in absolute terms.
(Figure
(Figure 61) but the values are expressed in
(Figure 46) but only absolute current values
(Figure 60). All waveforms are synchronized
60). All waveforms