ABB PQFS Installation, Operation And Maintenance Instructions page 11

In order to transport the equipment use a forklift or similar equipment. PQFS enclosures
are best transported horizontally.
Table 1: Maximum allowed ambient conditions during transportation
Temperature
Relative humidity
Contamination levels (IEC 60721-3-3)
Remarks:
(a) Locations with normal levels of contaminants, experienced in urban areas with industrial
activities scattered over the whole area, or with heavy traffic. Also applies to locations with
immediate neighborhood of industrial sources with chemical emissions.
(b) Locations without special precautions to minimize the presence of sand or dust. Also
applies to locations in close proximity to sand or dust sources.
In order to lift the equipment once it is at the installation location:
−
Remove the top cover of the protecting box (see
−
Remove the 4 panel securing screws at the bottom and the top of the enclosure
(see Figure 2).
−
Remove first the right side of the protective cover and put it aside (see
Figure 3: Lifting the right protective cover and putting it aside
Transportation (in the protected package)
-25 to 70°C (-13 to 158°F)
Max. 95%
Chemical class 3C3
Mechanical class 3S3
Bottom side
Figure 2: Locating the 4 panel securing screws
(a)
(b)
Figure 1).
Top side
Manual Power Quality Filter PQFS  Upon Reception 11
Figure 3).