Manual Ratio Selection (Preset Ratios/Zoom) - Sharp MX-C380 Operation Manual

MANUAL RATIO SELECTION (Preset ratios/Zoom)

Select the [Copy Ratio] key in the base screen of copy mode to select one of four (two) preset enlargement ratios or four
(three) preset reduction ratios (maximum 200%, minimum 50%).
In addition, the zoom keys can be used to select any ratio from 50% to 200% in increments of 1%.
Keys in the display can be selected with the arrow keys and the [OK] key.
• Preset ratios (two enlargement ratios and two reduction ratios) can be set in "Add or Change Extra Preset Ratios" in
the system settings (administrator).
• You can also change the number with the
To increase the ratio, select the
press the [OK] key. (To make the ratio change continuously, hold down the [OK] key after selecting the
key. If you continue to hold down the [OK] key for more than 3 seconds, the ratio will start changing quickly.)
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 50% to 200%.
To return the ratio to 100%...
To return the ratio setting to 100%, select the [Copy Ratio] key to display the ratio menu and then select the [100%] key.
System Settings (Administrator): Add or Change Extra Preset Ratios
Two enlargement preset ratios (101% to 200%) and two reduction preset ratios (50% to 99%) can be added. An added
preset ratio can also be changed.
Set the ratio.
Select a preset ratio key and/or the zoom keys to set the ratio.
● Setting a preset ratio
BACK OK
• Enlargement keys:
115%, 122%, 141% and 200% (for the AB system).
129% and 200%(for the inch system).
• Reduction keys:
50%, 70%, 81% and 86% (for the AB system).
50%, 64% and 77% (for the inch system).
• [100%] key
Select the desired preset ratio.
You will return to the base screen.
Make sure that a paper size suitable for the ratio is selected.
● Setting any ratio
BACK OK
Select the zoom key number display and press the [OK] key. A
number entry screen will appear.
Enter the desired number with the numeric keys and select the
[OK] key in the number entry screen. A ratio from 50% to 200%
can be selected in increments of 1%.
Press the [BACK] key.
You will return to the base screen.
Make sure that a paper size suitable for the ratio is selected.
keys.
key and press the [OK] key. To decrease the ratio, select the
2-26
COPIER
key and
Contents