Business Card Feeder - Sharp MX-C380 Operation Manual

BUSINESS CARD FEEDER

This feeder attaches to the automatic document feeder and is used to automatically scan business cards.
1
2
• When you have attached the business card feeder, enable "Business Card Scan Option" in the system settings
(administrator).
• When scanning business cards, it is convenient to use "Business Card Scan" in the special modes for copying and
scanning.
3
4
System Settings (Administrator): Business Card Scan Option (Web page only)
Specify whether or not the Business Card Scan function is used.
BEFORE USING THE MACHINE
Open the original guide to the maximum
width.
Place the business card feeder on the
document feeder tray.
(1) Place the business card feeder in the centre
of the document feeder tray.
(2) Gently press down on the business card
feeder.
You will hear the feeder click into place.
Load the business cards.
Make sure the edges of the cards are aligned evenly.
Insert the cards face up all the way into the business card
feeder.
After using the business card feeder, lift
the feeder to remove it.
You will hear a click sound as the feeder is released. Store the
feeder in its storage pocket.
1-55
Contents