Fax Polling Security - Sharp MX-C381 Operation Manual

Allow/Reject Number Setting
Use this setting to specify whether reception from a
stored number is to be allowed or rejected.
Item
Reject Reject reception from the stored number.
Reception
Allow Allow reception from the stored number.
Reception
Even if numbers have been stored,
All Invalid disregard the numbers and allow
reception from all numbers.
Store a new number for which allow or
reject will be specified (maximum of 50
Add New numbers).
Enter the number (maximum of 20 digits)
and touch the [Store] key.
A list of the stored numbers can be
Registration displayed.
Number List A number can be selected in this screen
to delete it from the list.
When no numbers have been stored for allow/reject
specification, no keys other than [Add New] can be
selected.

Fax Polling Security

The following settings are for regular polling memory
using the Public Box.
Set Fax Polling Security
When the memory polling function is used, this setting
determines whether any machine will be allowed to poll
your machine, or only machines that have been stored in
your machine.
Add New
When the Polling Security Setting is enabled, use this
setting to store (or delete) the fax numbers of the
machines that are allowed to poll your machine. The
stored fax numbers are called passcode numbers. Up to
10 passcode numbers can be stored (maximum of 20
digits each).
Passcode Number Key List
This shows a list of the stored passcode numbers. A
number can be selected to delete it.
Note that these settings do not apply to F-code polling
memory.
Description
7-106
SYSTEM SETTINGS
Contents