Metadata Fields - Sharp MX-C381 Operation Manual

METADATA FIELDS

The following three types of metadata are included in the XML file that is transmitted.
• Data automatically generated by the machine: These data are always included in the XML file and are automatically
• Previously defined fields:
• User defined fields:
If a defined metadata field is one of the following fields, a message will appear informing you that the field cannot be
entered. Enter appropriate information in the related items of the send settings.
Name entered in
metadata field
fromName
replyTo
documentSubject
fileName
stored on your computer.
These fields are automatically recognized by the machine and
assigned to appropriate XML tags. These fields are selectable, and
can only be included in the XML file if enabled in the Web pages.
Custom fields can be added to the XML file. These fields are selectable
and can be defined in the Web pages.
Description
Name of the user who sent the job. If the
name is not entered as metadata, the sender
name determined by the usual rules for
determining the sender name will be applied
as metadata.
E-mail address to which the transmission
result will be sent.
Job name appearing in the e-mail "Subject"
line, or job name on the fax cover sheet.
When the user enters a [Subject] in the send
settings screen in the touch panel, the
entered value is applied as metadata.
Enter the file name of the image to be sent.
5-111
SCANNER/INTERNET FAX
Where entered
[Reply-To]
(Sender name of selected sender)
[Reply-To]
(E-mail address of selected sender)
[Subject]
(Blank until a value is set in the send settings
screen.)
[File Name]
(Only when the [Allow Custom Filenames]
checkbox is selected in the metadata
settings screen in the Web pages.)
(Blank until a value is set in the send settings
screen.)
Contents